Topping our list is the iGotTech Magnetic Screen Door, which is uniquely designed and constructed with heavy duty strong mesh that ensures 100% durability and reliability. Featuring 26 powerful magnets sewn on to the edges of the screen, it ensures a tight fit once installed to keep out any unwanted insects, bugs, critters, or even pollen.
The framework of the screen is lined with premium grade Velcro and fits openings of up to 34 inches by 82 inches in size. Overall, it is also one of the most durable screen doors, which may explain why it’s so popular in the first place.
Here You Will Find More Recommendations:
Magnetic screen doors can be an extremely effective tool to use to keep out bugs and other pests. They are less expensive than traditional screen doors, go up in a relatively short period of time and are easy-to-use. If there’s one thing that keeps more people from installing these devices, it’s the fact that there’s a perception that they’re hard to use, which just isn’t true.
In fact, there are probably few devices as easy-to-use as these screen doors. This is particularly true of the magic mesh models which go up quickly and generally last a long time. In order to show you just how easy these screens are to install, we’ve decided to create the following guide. A guide that will allow you to throw one of these screens up in no time flat.
Installing a Magnetic Screen Door
You’re not going to need a lot of tools to get started installing your screen door but there are a few items you are going to need. Here are the common tools needed for installing this form of screen door:
- Measuring Tape
- Thumb Tacks (Optional)
Step One: Getting Setup
The first thing that you need to do after you take the product out of the box, of course, is to spread it out on the floor in front of you. Lay it there as if it were hanging on a doorway, but instead of it being vertical its horizontal. In this configuration, the magnets at the top of the screen are closer together than the magnets near the bottom.
In fact, the bottom portion of the screen should have a gap where there are no magnets. Now, make sure all of the magnets in the middle line up. You are now ready to proceed to step two.
Step Two: Check Magnet Alignment
It’s now time to check whether the magnets easily line up or not. Open and close the magnets along the door and check to make sure that they are aligned properly. If the magnets don’t align properly, then that can leave an opening that will let insects into the home.
If the magnets aren’t aligning properly, then recheck how you have the door spread out and double check it. Once you confirm that everything is in order, you can then move on to step three.
Step Three: Attach the Anchors
Different magnetic screen doors affix to your door frame in different ways. Some of them use Velcro tabs that can be installed, some use a tension rod, and some use adhesive tabs.
Since adhesive glue tabs are the most common method these devices use to attach to the door frame, we’re going to assume that’s the one you’re using.
If this is indeed the case, then attach the adhesive tabs to the actual screen, and not to your screen door. When that’s complete you can then move on to step four.
Step Four: Prepare the Door Frame
Before installing your magnetic screen, you are going to want to ensure that the frame is free of anything that might impair installing your screen. This includes tacks, tape, or nails that might be sticking out of the frame.
After you get rid of those items, then you can begin preparing the door frame for the installation of the screen. Using your favorite non-oil based cleaner and a wet cloth, thoroughly clean the door frame. Wait until it has dried thoroughly and then move on to step five.
Step Five: Make Proper Measurements
Using a measuring tape, measure your screen door as well as the height of your door’s frame. Determine how high you need to install the screen to avoid it from touching on the floor. Once you’ve found that sweet spot, then you can use a pencil to make the point on the door frame where you plan on installing the top side of the screen.
The next thing you’re going to want to do is to measure the width of the door. Divide the measurement in half, and mark that middle point on the top of the door frame. The center is where the magnets will come together to close the screen door. It’s time to move on to step six.
Step Six: Attach the Screen
Now it’s time to attach the screen. If your screen uses some sort of tension rod to hold the top portion of the screen in place, then now would be the time to put it up. If your screen uses adhesive tabs instead, then simply press the top portion into place before you move on to the sides of the frame.
Make sure that you install it according to the pencil markings that you made earlier: the middle lined up with the middle and the height on either side properly adjusted. Go around the perimeter of the frame and screen door to make sure everything is evenly aligned. Let’s move on to step seven.
Step Seven: Time for Reinforcements (Optional)
This step is optional and only applies to people who are using this screen with a door frame that’s made of wood. If your door frame is made of some other material, or if you don’t feel the need to reinforce the screen, then you can skip this step.
Having said that, if you want to reinforce the screen to the wood door frame, then you can insert thumb tacks through the mesh, and around the perimeter of the frame to give it a little bit of holding power. Most magnetic screen doors have fairly sturdy adhesive tabs, but if the door gets a lot of traffic then this might be a step that you want to follow.
Step Eight: Test the Screen
The last thing you are going to want to do is to test the screen out. You can easily do it by walking through it several times.
Each time you walk through it, the screen should part to let you through, and then the magnets should pull the screen closed after you’ve gone through it.
If the screen doesn’t work in this way, then you may need to make adjustments to ensure that it opens and closes properly.