10 Best Car Scratch Removers in 2020 – Reviews

It doesn’t matter if the car owner’s paint is plagued by light scratching, oxidation, sun spots, or water swirls, because this product will take care of it all. It’s a high-quality formula that’s easy to apply, is compatible with a wide variety of car paints, and won’t ever harm clear-coat or automotive paint. It quickly removes fine scratches by filling them in and its formula is designed to never corrode a car’s paint level. This formula can be applied using a micro-fiber towel and can be hand-buffed to produce a high-gloss finish that’s sure to wow everyone who sees the car.

Can’t Find What You’re Looking For? Check these suggestions:

Car Scratch Remover Guide

Even though most car scratch removers make it extremely easy for the user to achieve great results while using their products, sometimes car owners need a little bit of extra help to get excellent results. Sometimes the instructions that come with the scratch remover aren’t really clear to the reader, and at other times, the product doesn’t come with any instructions at all. That’s why we’ve prepared this little guide that should help car owners get the best results possible removing scratches, swirls, and other defects from the car’s clear coat, and/or paint.

Step One: Clean The Car

Before attempting to fix scratches, oxidation or other perfections in your vehicle’s paint, it’s important to thoroughly clean it. When washing your car, be sure to park it in a shaded area, and to use a high-quality automotive soap. Just fill up a bucket of warm water and soap, and grab a soft-bristled brush that’s made specifically for washing cars. Make sure to clean the entire surface of the car fully before continuing on to the next step.

Step Two: Thoroughly Dry The Car

The next step involves drying the car thoroughly. Although many people think that they can just let their car air dry and everything will be fine, the truth of the matter is that letting the car air-dry is the worst thing you can do. Air drying results in water-spots, which can absolutely ruin the look of the car. A better way is to use a soft microfiber towel to dry the towel. Not only does towel-drying prevent water spots from forming, but it can also remove any debris that you may have missed during the washing process.

Step Three: Prepare The Buffer

If you’re using a car scratch remover that doesn’t require a buffer, then you can go ahead and skip to step four. However, if you aren’t, then you are going to want to make sure that you prepare your buffer and pad. Make sure that the pad is attached firmly, and then place the scratch remover compound from the center of the pad to the pad’s edge. When applying the scratch remover compound, be sure that you don’t place too much of it on the pad, or you won’t get satisfactory results.

Step Four: Apply It To The Car

Once the compound has been placed properly on the pad, it’s time to apply it to the vehicle. Place the buffer’s pad against the scratched part of the car and manually move the pad around to get the compound down into the scratch. Make sure while you’re performing this step, you don’t turn the buffer on or you’ll end up kicking the compound out of the scratch. Be sure to do a couple of passes to make sure that the right amount of compound down into the car’s scratch before proceeding to Step Five.

Step Five: Turn On The Buffer

Once you’ve made several passes manually with the pad, you can then proceed to turn it on. While buffing the vehicle, you should maintain a constant buffer speed of 1,200 to 1,400 RPMs and move the pad in a back-and-forth motion over the scratched area. Check the scratch every few moments to see if the scratch can be still seen. If it’s still visible, continue to buff. When the scratch has disappeared, then buffing should immediately come to an end.

Step Six: Wipe Down The Vehicle

Once buffing has come to an end, use a soft microfiber towel to remove any extra scratch compound that may remain on the car’s paint.

Step Seven: Do The Entire Car

Once you have buffed out the scratch, you are most likely looking at a spot on the car’s paint that’s shinier than the rest of the car. Therefore, you’re probably going to want to make sure that you buff down the entire car. For buffing the rest of the car, make sure that you equip a clean foam pad on the buffer with the proper amount of compound. Now go over the entire length of the car. When that’s done, use a microfiber cloth to wipe down the car again and remove any debris that’s been left by the pad.

Step Eight: Wax And Buff The Car Until It’s Shines

With the buffing done, it’s now time to apply wax to the vehicle. Make sure to use high-quality automotive wax and apply it evenly to the car’s paint. Then equip your buffer with a clean foaming pad and buff the entire surface of the car. Make sure to cover the entirety of the car and try not to miss any spots. Congratulations, you’ve not only removed the scratches from your car, but you have also shined it to perfection. Now go out and enjoy it.

Leave a Comment

Your email address will not be published. Required fields are marked *

Want me to write short stories about your recipes?

I would Love to. Just send me a message.

Subscribe for newsletter

Join Our 203,849 Subscribers

A peep at some distant orb has power to raise and purify our thoughts like a strain of sacred music, or a noble picture, or a passage from the grander poets. It always does one good.

I only send really good stuff occasionally. Promise.

Scroll to Top